OC1 Gaisa Filtru Eļļa, BIO 1L

Mēs piegādājam visā pasaulē. Preces ir izsūtītas vienas darba dienas laikā.

Piegādes laiks un cena car atšķirties, ņemot vērā tavu lokāciju. Mūsu express piegādes iespējas atšķiras no 1 līdz 9 darba dienām.

Apskatīt detalizētākus piegādes laikus un cenas, izvēlies valsti:

FedEx piegādes izsekošana

DHL piegādes izsekošana

DPD piegādes izsekošana

Latvijas Pasta piegādes izsekošana

OC1 Biodegradable Air Filter Oil 1L

OC1 Air Filter Oil is a premium quality lubricant specially formulated for foam air filters on off-road bikes and ATVs. Its special formula guarantees complete protection for all types of foam filters and ensures maximum engine performance and durability.

This blue colored air filter oil is water resistant and efficiently retains dust, mud and sand. It is designed to extend engine life. The limited loss of load on the air intake improves engine performance, while the anti-clog formula prevents clogging. The formula also prevents water from entering the filter when crossing fords.

One of the main advantages of OC1 air filter oil is its fast drying time. So you don't have to wait long before you can reassemble the filter. Its low viscosity and super sticky formula easily penetrates the filter and maximizes airflow, which in turn increases performance.

Additionally, the proprietary formulation contains polymeric additives that provide a hyper-tacky surface to resist flying sand, dust, water, mud and dirt. This helps ensure your engine is protected, even in the harshest of conditions.

OC1 air filter oil is naturally biodegradable and therefore environmentally friendly. It is also non-chlorinated, which reduces the risk of pollution.

• Inherently biodegradable and environmentally friendly
• Low viscosity, super tacky formula easily penetrates the filter to maximize airflow
• Non-chlorinated, reducing the risk of harm to the environment
• Prevents water from penetrating the filter when crossing fords
• Prolongs the engine's life span and improves power output
• Proprietary formulation contains polymeric additives that provide a hyper-tacky surface to resist airborne sand, dust, water, mud, and grime
• Provides complete protection for all foam filter types
• Rapid drying time allows for quick reassembly of filter
• Recommended to use with OC1 Air Filter Cleaner for optimal performance.
• Specially designed for foam air filters on off-road bikes and ATVs
• Using OC1 Air Filter Oil can extend the life of your engine and improve its performance in any off-road situation
• Water-resistant and efficiently retains dust, mud, and sand

How to use:

1. Remove the air filter from your motorcycle or ATV.
2. Clean the air filter with OC1 Air Filter Cleaner according to the instructions on the label.
3. Shake the bottle of OC1 Air Filter Oil well before use to activate the formula.
4. Wearing workshop gloves, pour enough air filter oil into a tub to fully submerge the filter entirely in the oil, or apply up to 100ml of oil and massage it into the filter.
5. Ensure that the entire filter is coated on both the inside and outside surfaces. The blue dye helps to easily identify the protected areas.
6. Gently squeeze out any excess oil.
7. Allow the filter to sit for 10 minutes to allow the oil to evaporate and penetrate the filter.
8. Gently squeeze the filter to remove any excess oil.
9. Grease the rim of the filter and the inside of the airbox for improved air filtration efficiency.
10. Reassemble the air filter into the airbox and start the engine.